pico-Brewing System

pico-Brewing System

Pricing information is available for the pico-Brewing system.

Click on component for more information.

Brew 5 to 25 gallon batches!

 

Kettle

-15.5 U.S. Gallon
– 304 Stainless Steel
– Reconditioned beer kegs
– major dents removed
– chines streightened
– cleaned and acid dipped
– (1) 1/2″ FIP drain fitting

– (1) copper internal drain

– (2) 1/4″ FIP thermometer fittings

– (2) copper thermometer wells

– 12″ opening cut in the top

– special slot that allows the chiller
or hose access with the lid in place

Valve

Bronze valve assembly

– 1/2″ ball valve
– adapted to the kettle
– 3/4″ male garden hose
Stainless steel valve assembly

– 1/2″ ball valve

– adapted to the kettle

– bronze 3/4″ male garden hose

Thermometer

Drain Hose Back to
System

– stainless steel braided rubber hose
– (1) 3/4″ female garden hose fittings
– (1) 3/8″ male or female flair fitting
– rated to 250F
– 3/8″ dia. 16″ long
– sets up a siphon to drain the kettle completely

Lid

– 12″ stainless steel lid
– one for each kettle

Screen Back to System

Copper Screen

– 15.375″ Diameter
– 2 piece
– slotted perferations (.046″x.3125″ )

Support

Stainless Steel Support

– removable
– designed to fit 15.375″ dia. kettle
– 2.25″ tall

Chiller Back to System

Copper Wort Chiller

– 50′ Copper coil
– a second chiller can be used in a bucket of ice if your ground water is too warm to cool the wort.

Paddle

– Handsome 36″ long hand crafted wooden paddle

Pump Back to System

The pump is used to:

– pump water to the mash
– circulate wort in the mash
– pump wort to the boiler
– circulate wort to speed cooling
– pump wort to the fermenter
pico-Pump

-1/100th HP – 115VAC

– magnetically coupled

– bronze pump head

– recirculating pump

– rated to 230F

– pumps 2-3gpm – 3′ head

nano-Pump

-1/25th HP – 115VAC

– magnetically coupled

– bronze pump head

– recirculating pump

– rated to 230F

– pumps 5-6gpm – 11′ head

Hose

– stainless steel braided rubber hose
– (2) 3/4″ female garden hose fittings
– rated to 250F
– available in (2) sizes
– 3/8″ dia. 48″ long
– 1/2″ dia. 60″ long

Sparge Head Back to
System

– 4″ diameter
– stainless steel screen
– rated to 230F

Burner

Multi-jet Burner

– 170,000 BTU burner output
– includes hose(s) manifold and high pressure regulator
– Propane Only
– uses half the gas of the original jet burner.
Original Jet Burner

– 200,000 BTU output with propane
– 100,000 BTU output with natural gas
– includes hose(s) manifold and high pressure regulator