Bayou Classic 800-410, 10-gal Stainless Steel 6 pc. Brew Kettle

November 25, 2018 - Comment

Bayou Classic, Premium 10-gallon Brew Kettle, 6-pc set, is designed for the serious All-Grain Home Brewer. This premium stainless kettle features a tri-ply bottom and includes a domed lid, stainless Spigot with Ball Valve, side-mount 3-inch Brew Thermometer ranging 60-220 degrees, stainless False Bottom that sets 3.25 Inch above the bottom of the pot, and

Order on Amazon! $114.26Amazon.com Price
(as of December 12, 2018 12:55 pm GMT - Details)

Bayou Classic, Premium 10-gallon Brew Kettle, 6-pc set, is designed for the serious All-Grain Home Brewer. This premium stainless kettle features a tri-ply bottom and includes a domed lid, stainless Spigot with Ball Valve, side-mount 3-inch Brew Thermometer ranging 60-220 degrees, stainless False Bottom that sets 3.25 Inch above the bottom of the pot, and a tube shaped Filter Screen. Bulkhead fittings enable easy attachment of thermometer and spigot for a water-tight seal. Side calibration measuring in gallon and quart that read from the inside of the kettle, enabling more accurate water level setting. The try-ply bottom promotes even heating and fights against scorching, while the all stainless construction has no interaction with wort or acids. The narrow diameter and high side walls reduce the chance of boil overs; and the false bottom fits tightly on the low side indention to reduce particles and grain from entering the spigot chamber.

Comments

Anonymous says:

Good Kettle This is a good, solid kettle. The size may make it a bit difficult to use on a conventional cook top (especially one with a hood). I have found that I can get by using a step-stool to stir/mash. The kettle heats evenly and quickly. The built in thermometer provides an ideal set-up if you are using this as a mash tun (which I am).The package arrived in good condition. It may be noteworthy that there is some assembly required as the valve and thermometer unit must be installed. I…

Anonymous says:

Like others have said the fitment of the thermometer and … Like others have said the fitment of the thermometer and ball valve take a little bit of tinkering to get right, expect some very small slow leaks at first, test with water initially to ensure you have everything sealed well.Finish and looks are amazing. Thermometer is top notch and can be calibrated if it is slightly off. over all great product. Well worth it.

Anonymous says:

First All Grain Setup Arrived as advertised and in a timely manner.Setup Comments:Some assembly was required – the pot had two holes in it: one for the thermometer and one for the valve. There were instructions, but they didn’t cover where to put the rubber O-Rings. There was also a plastic device that was some sort of ball bearing thing that I never figured out what to do with.This is probably obvious, but make sure that you test it for leaks with water before you use it on the…

Write a comment

*